Knowledge

1. Ordinary low carbon steel hot rolled wire rod (GB701-65) Ordinary low-carbon steel hot-rolled wire rod is rolled from low-carbon ordinary carbon st

The screw wire needs to be processed before it can be put into screw production. The following is a brief introduction to the pickling and wire drawin

Wire rods and straight rods with a diameter of 5-9mm (also hot-rolled by rolling mills). Wires of all kinds (cold drawn by wire drawing machines) are

1. The process of the drawing process The metal drawing process is carried out on a sheet metal deep drawing machine. In metal drawing or deep drawing

Drawing wire is for small wire diameter, usually less than 1.8mm and more than 0.1mm. Small wire diameter specifications are not uniform. It is genera

Hot drawing is drawing after heating or drawing while heating, the purpose is to enhance the flexibility and stretchability of the wire under high-tem

This is mainly caused by the following factors: 1. The sizing area of the wire drawing die will become larger due to normal wear during uninterrupted

Low-carbon steel wire for general use is the most productive type of steel wire, and its diameter is between 0.16 and 10 mm. According to the surface

Wire rods are mainly used as raw materials for reinforcing and welding structural parts of reinforced concrete or for reprocessing (such as wire drawi

1. Steel plane abrasive belt drawing process Flat-pressed wire drawing is a very common wire drawing method. The workpiece is fixed on the mold, and t

Operation Rules for Repeated Bending Testing Machine for Metal Wire The repeated bending test machine for metal wires is used for the performance of m

The main function of the wire According to the steel distribution catalog, the wire rods include ordinary low carbon steel hot-rolled wire rods, elect