The use of various steel wire products produced by steel wire manufacturers is very wide, ranging from various industrial parts to major building components, and carbon spring steel wires can even be seen in many dangerous emergency situations. We need to maintain the steel wire products in use in a timely manner. If any quality problems are found, they need to be replaced in time to ensure safety. What aspects should be paid attention to in the daily maintenance of steel wire products?
The use period of the wire rope has a lot to do with the method of use. Therefore, it should be used in accordance with the regulations to prevent delay and throwing. During use, it cannot be overloaded, the wire rope cannot be bent at an acute angle, or the lifting speed can be drastically changed. Generate impact load. If there is rust and dirt on the wire, we need to use a wire brush to clean the dirt and apply oil for maintenance.
Under normal circumstances, the steel wire needs to be oiled and maintained once after 4 months of continuous use. When applying oil, use hot oil (about 50°C) to soak the core of the rope, and then wipe off the remaining greased steel wire. After coiling, it should be placed in a clean and monotonous place. , Do not stack up to prevent sprains. The end of the steel wire is tied tightly with a steel wire or welded firmly with an alloy with a low melting point. It can also be tightened with an iron band to prevent the rope end from falling apart.
In the actual use of steel wire, if we find oil droplets on the surface of the steel wire seep out, this is usually due to considerable pressure inside the steel wire. We should reduce the load of the steel wire and carry out relevant safety tests. If necessary, Replace the steel wire in time.
