How should I take out the screws of my mobile phone that have slipped?

Mobile phones are an indispensable tool in people's daily lives, and the screws are also a very important part. However, due to improper operation or other reasons, screws often slip, causing us a lot of trouble. So, how do you take out the screws of your mobile phone that have slipped?
First, we need to understand what a screw slide is. Screw slip means that the thread of the screw is damaged due to various reasons, making it impossible to continue to screw it on or cannot be screwed on. In this case, we will feel insufficient strength when tightening the screw, and the screw head will be deformed.
Next, we will introduce some commonly used methods to remove sliding screws. The first is to use the glue method. This method requires some glue or strong glue. First apply glue to the threaded part of the screw, wait for the glue to dry, and then use a tool to unscrew it. What needs to be noted with this method is that the glue must be compatible with the screw material, otherwise it will cause damage to the screws.
The second method is to use the pliers method. This method requires a pair of small pliers. First clamp the tip of the pliers onto the head of the screw, then rotate the pliers firmly until the screw comes out. What needs to be noted with this method is that the tip of the pliers must be thin enough, otherwise it will affect the effect of screwing.
The third method is to use the drill method. This method requires a small electric drill and some small drill bits. First use a small drill bit to make a small hole in the head of the screw, and then use a slightly larger drill bit to pass through the small hole until the screw is removed. What needs to be noted with this method is that the size of the drill bit must be appropriate, otherwise it will cause damage to the screws, and you must be careful during operation to avoid hurting yourself.
The fourth method is to use the screwdriver method. This method requires a small screwdriver. Cut the threaded part of the screw first, and then use a tool to unscrew it. What needs to be noted with this method is that the size of the screwdriver must be appropriate, otherwise it will cause damage to the screws, and you must be careful when operating to avoid hurting yourself.