Ring slot rivet is a kind of multifunctional connecting tool

Ring slot rivet is a multi-functional connecting tool, which can be divided into many forms, including flat head, countersunk head, half round head and flat head with flange. They can also be classified according to the size of the diameter, such as large diameter ring grooved rivet, small diameter ring grooved rivet, and special continuous grooved ring grooved rivet and short tail rivet. When using a ring groove rivet, the rivet is first placed into the hole of the part to be joined, and then a specialized tool, such as a pneumatic ring groove rivet gun, is used to tighten the rivet until it breaks. At this time, the inner wall of the nail sleeve will squeeze into the working segment ring groove of the rivet, forming a new rivet head, so that the parts to be connected are fastened together. This convenient operation, high efficiency, low noise, and good seismic performance characteristics make ring groove rivets widely used in a variety of industries, such as automobiles, ships, aviation, mechanical equipment and building structures. Ring rivet material is also available in a variety of options. For example, the aluminum ring groove rivet is made of 7A03 aluminum alloy, and the nail sleeve is made of 5052 rust-proof aluminum. The steel ring groove rivet is made of 35 steel and the nail sleeve is made of 10 steel. Stainless steel ring rivet is made of 0Cr18Ni9 or 1Cr18Ni9 stainless steel. Although the ring groove rivet is a blind rivet type, its installation is different from the traditional blind rivet, and it needs to be installed from both sides of the connecting plate. This makes ring rivet in cutting strength, tensile strength, clamp loading and vibration resistance are stronger than other types of blind rivet, thus showing higher performance in practical applications.